seeken sg3 backup flash file 100% tested file

 

 

 

 

 

 

Patch Level    : NRD90M
Display ID     : Seeken_SG3_V6.0_20190222
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2018-08-05
Build Time     : 22.02.2019
Product Model  : SG3
Product Brand  : Seeken
Product Name   : Seeken_SG3
Product Device : Seeken_SG3
Product Board  : Seeken_SG3
Product Manfct : EastAeon
Board Platform : mt6750
Product Info   : aeon6750_65_n

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM25)
MODE : BOOTROM
PORT : 25
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN [RAPHAEL]
BROM : MEID : D921E833BEACA4166194191FB666A4C1
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_aeon6750_65_n.bin
     EMI : CNT : 0005
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00038000 [ 224.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 13014E51324A39375610002A3D58334B
        EMMC: VEN : MICRON : OEM : 78 : ID : 51324A393756
        EMMC: VEN : MICRON : Q2J97V
        EMMC: SNN : 2768216 ( 0x002A3D58) , MF : 3/2016

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 58620BE9C86E36621AEC42E2E4C77D6

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM47)
MODE : PRELOADER PORT
PORT : 47

Boot done!

Patch Level    : NRD90M
Display ID     : Seeken_SG3_V6.0_20190222
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2018-08-05
Build Time     : 22.02.2019
Product Model  : SG3
Product Brand  : Seeken
Product Name   : Seeken_SG3
Product Device : Seeken_SG3
Product Board  : Seeken_SG3
Product Manfct : EastAeon
Board Platform : mt6750
Product Info   : aeon6750_65_n

MT6750__EastAeon__SG3__7.0__Seeken_SG3_V6.0_20190222__NRD90M__aeon6750_65_n

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 11%
Read : cache.img
Read : userdata.img

FW Size  : 3.51 GB
Android Info saved : _Android_info.txt
Scatter  : MT6750_Android_scatter.txt
Saved to : C:\Users\YASIR GSM\cm2 bakup\MT6750__EastAeon__SG3__7.0__Seeken_SG3_V6.0_20190222__NRD90M__aeon6750_65_n\

Done!
Elapsed: 00:03:50